Helmholz NETLink PRO Series - Creating a Picture

NETLink
®
PRO family Application Examples
37
• Fill the table with the following values:
Name
user-defined
Decimal places
0
Min PLC
-128
Max PLC
127
Min PC
0
Max PC
256
Driver
S5-S7-COMBI RFC 1006
IO
Input
Baustein-Typ
MERKER
Format
S7-BYTE
• Values not defined above are left at default.
• Save the project (STRG+S).
8.2
Creating a Picture
• Right-click on “Pictures“ and select “New”.
• A new Picture is created and displayed
• Click the tab “Dynamic” under “Items” and then “Numeric
Field”