Helmholz NETLink PRO Series - KEPserverEx V6.2.429.0 (KEPware Inc.); Configuring KEPserverEx

NETLink
®
PRO family Application Examples
24
7 KEPserverEx V6.2.429.0 (KEPware Inc.)
The following steps must be performed in the described se-
quence (status November 2017):
7.1
Configuring KEPserverEx
Start program module KEPServerEx, create a new project or
right-click in the demo project and select “New Channel”.
Select device driver “Siemens TCP/IP Ethernet”