Helmholz NETLink PRO Series - 6 Intouch V9.5 (Wonderware Gmbh); Starting the System Management Console; Configuring the Device Group

NETLink
®
PRO family Application Examples
22
6 InTouch V9.5 (Wonderware GmbH)
(System Management Console 2.0 Version 5.1)
The following steps must be performed in the described se-
quence (status July 2007):
6.1
Starting the System Management Console
"Start->Programs->Wonderware->System Management Console"
6.2
Configuring the Device Group
Enter Device Group (later the NETLink
®
will be addressed with
this name from the WWClient)