Do you have a question about the Henley BLASKET and is the answer not in the manual?
Requirements for the stove's base, including thickness and load-bearing capacity.
Air supply requirements for proper combustion and effective flue performance.
Requirements for the chimney system, including condition and flue draught.
Specifies clearances for flue exit based on building regulations and roof configuration.
Safe distances to combustible materials and construction around the stove.
Explanation of primary, secondary (airwash), and tertiary air intakes.
How to set and use the stove's thermostat for temperature control.
Safety advice for opening the hot stove door using a protective glove.
Approved fuels and prohibited fuels for the stove.
Step-by-step guide for starting a fire in the stove.
Instructions on how to add fuel to a burning stove for optimal results.
Procedure for safely extinguishing the fire in the stove.
How and when to clean the chimney system to prevent blockages.
Guide to replacing the door seal for a proper seal.
Safe procedure for removing ash from the firebox.
How to remove the fuel retainer from the stove.
Step-by-step guide for replacing broken stove door glass.
How to clean and maintain the stove's painted finish.
Information on warranty coverage, activation, and limitations.
What to do in case of a chimney fire or over firing.
Advice for preparing the stove for periods of non-use.