EasyManua.ls Logo

Henry Radio 5K Classic User Manual

Default Icon
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Henry Radio
Linear Amplifiers
-----------------------------
Operating and Maintenance
Manual
-----------------------------
3K Classic Mark II
3K Classic X Mark II
5K Classic.
-
II
E
M
RY
REIDI
O
2050 S. BUNDY
DRIVE
LOS ANGELES, CA 90025 USA
(213) 820-1234
Telex: 67-3625 (Henradio)
Question and Answer IconNeed help?

Do you have a question about the Henry Radio 5K Classic and is the answer not in the manual?

Henry Radio 5K Classic Specifications

General IconGeneral
BrandHenry Radio
Model5K Classic
CategoryAmplifier
LanguageEnglish

Summary

Section 1. Specifications

Product Overview and Key Parameters

Covers type, function, output power, gain, tube complement, and frequency range.

Physical, Operational, and Power Specs

Details dimensions, weight, cooling, duty cycle, impedance, and power requirements.

Controls, Metering, and Protection

Explains front panel controls, metering, protective devices, and rear panel connections.

Other Features and Notes

Highlights additional features, relay keying, and important notes.

Section 2. Introduction

General Product Overview

Introduces the amplifier family and its design principles.

Section 3. Installation

Unpacking, Location, and Cabling

Instructions for unpacking, placement, and connecting cables.

Transformer Taps and Voltage Settings

Guides on adjusting transformer taps for voltage compatibility.

Section 4. Operating Controls

Front Panel Controls Overview

Describes all controls located on the front panel of the amplifier.

Rear Panel Controls and Connections

Details rear panel connectors for ALC, relay, RF input/output, and ground.

Section 5. Operation

Preliminary Settings and Operation Modes

Steps for initial setup, SSB, and CW operation procedures.

ALC Adjustment and Tuning Methods

Procedures for adjusting ALC, tuning, and operating precautions.

Alternate Tuning and Safety Precautions

Alternative tuning methods and essential safety guidelines.

Section 6. Maintenance Procedures

Input Mismatch and Tube Problems

Troubleshooting for input signal issues and tube failures.

Receiver Sensitivity and Relay Issues

Diagnosing reduced sensitivity and relay circuit malfunctions.

Relay Circuit Problems

Diagnosing and resolving issues with the amplifier's relay circuits.

High Voltage Circuit Problems

Troubleshooting critical high voltage circuit issues and safety precautions.

Blower and Output Problems

Troubleshooting for blower failures and low RF output.

AC Line Voltage and Other Problems

Addressing AC line voltage issues and general operational problems.

Contacting the Factory

Information on how to contact the manufacturer for service.

Section 7. Disassembling Your Amplifier

Removing Panels and RF Deck

Steps for removing the top panel and the main RF deck.

Removing Wraparound Sections

Procedures for removing power supply and RF wraparound sections.

Section 9. Parts Lists.

Blower, Capacitors, and Connectors

Lists components for blower, capacitors, and external connectors.

Diodes, Fuses, Knobs, and Meters

Lists diodes, fuses, control knobs, and measurement meters.

Inductors, Pilot Lights, and Relays

Lists inductors, indicator lights, and relay components.

Resistors, Switches, Transformers, and Tubes

Lists resistors, switches, transformers, and vacuum tubes.

Section 10. Tube Specifications

General Tube Characteristics

Provides electrical and mechanical specifications for the vacuum tube.

Tube Application and Operating Conditions

Details on applying the tube and recommended operating conditions.

Section 11. Tune and Load Settings

Factory Tune and Load Data

Factory-provided settings for tuning and load controls by frequency.

User Data for Tune and Load

Space for users to record their own tune and load settings.

Related product manuals