Hensel Integra 250 Plus - 5 Technical Data

User manual // Integra Plus // Compact flash unit
HENSEL-VISIT GmbH & Co. KG 35
5 Technical data*
Series
Integra Plus
Model type
250
500
1000
Values attained at:
230 V / 50 Hz
Rated energy:
250 J
500 J
1000 J
Aperture at 100 ASA, t 1/60,
1 m distance (2m), 12’’ reflector:
45 8/10
(22 8/10)
64 8/10
(32 8/10)
90 9/10
(45 9/10)
Flash duration in sec., t 0,5:
1/2.380
1/1.390
1/1.680
Recycling time 100% power:
In sec. 1/32 power:
1,3
0,3
1,9
0,5
2,1
0,45
Flash tube:
U-flash tube, for plug-in, single coated
Power adjustment:
in 1/10 f over 6 f adjustable (1/1 … 1/32)
Modeling lamp max.:
300 W / G 6,35 halogen lamp
Modeling light adjustment:
FULL, OFF and PROP mode over 6 f
Features:
glass dome (clear, uncoated), plug-in coated flash
tube, fan, tilting head (adjustable), umbrella holder,
transportation protection cap, built-in receiver
(Strobe Wizard Plus and freemask), illuminated
front panel
Fuse
4 AF
Mains connection:
Bi-voltage (110 V and 230 V)
Weight (kg):
2,75
2,87
3,90
Measurements in cm without
handle (L x B x H):
33 x 15 x 23
33 x 15 x 23
39,5 x 15 x 23
Code No.:
8814FM
8815FM
8816FM
*: Technical changes reserved. Effective date: September 2013