HEOS Amp - Playing Music from an External Audio Device

Playing music from an external audio
device
1
Connect an external audio device to the digital optical,
analog RCA stereo or analog 3.5mm stereo input on the
back of the HEOS Amp.
2
Select “AUX Input” from the Music tab.
3
Select the name of the HEOS Amp to which you
connected the audio device in step 1.
4
Select the name of the input to which you connected
the audio device in step 1.
5
Initiate playback on the audio device.
.
Audio signal
Contents
Setup Use Troubleshooting Status LED Appendix
21