1. Transport buttons: SYNC, CUE, play/pause, SHIFT
2. Performance pads
3. Loop In/Out (start of loop/end of loop)
4. Enable/disable Vinyl (Scratch) mode
5. Tempo adjustment fader with visual beatmatching aid (red LEDs), and
green central LED for returning to the original tempo
6. Browse within the library; Assistant button for help choosing the best
upcoming tracks and displaying/selecting the energy level of the
suggested tracks; load track on corresponding deck
7. Gain control
8. Two-band equalization
9. Dual filters (low-pass/high-pass)
10. Monitoring on headphones of virtual decks 1 and 2, and of the Master
output
11. Volume faders for virtual decks 1 and 2
12. Crossfader
13. Headphones volume and Master volume (hardware settings)
14. Deck: Scratch, Pitch bend
15. Speakers output (1-2) in RCA format for connecting active speakers
16. USB cable for connection to a computer
17. Headphones output (3-4) in 1/8” (3.5 mm) mini-jack format
To Next Page
Loading...
