only one sound card for the speakers and headphones outputs. If your
built-in sound card only has one output (1-2) as in the example below,
you will not be able to use your headphones for monitoring.
In that case, connect your headphones and speakers directly to the
product.
7.5. I can’t connect my multimedia speakers to my DJControl
Instinct P8.
If your speakers’ connectors differ from the connectors on the DJControl
Instinct P8, you can use a dual RCA to 1/8” (3.5 mm) mini-jack adapter
(not included) or any other adapter format corresponding to your
speakers.
You can also connect your speakers to the headphones output and
duplicate output 1-2 on output 3-4 by pressing SHIFT + : however,
please be aware that in this mode, you will not be able to use the
monitoring function.
To return to the default mode, simply press SHIFT + .
To Next Page
Loading...
Need help?
General
