36
Effects (FX)
An effect is a filter or a combination of filters applied to a
track to modify its sound (echo, reverb…).
1. To access FX mode, press SHIFT and HOT CUE at
the same time. The HOT CUE button flashes.
2. To apply an effect, press and hold a pad.
3. To exit FX mode, press HOT CUE.
− Effect applied: pad lit up
− No effect applied: pad not lit up
To apply an effect, you can only use the
pads
corresponding to the deck on which the track is
being played.
In djay, it is possible to apply other effects:
1. Display djay in landscape format.
2. Tap the FX/Loop/Cue/EQ button, then tap .
To Next Page
Loading...