Why is there no lighting in VU meters of Heritage Audio Recording Equipment?
The VU meters on your Heritage Audio Recording Equipment not being lit is normal in Bypass mode. Upon activating the unit, they will light up.
What to do if drum hits sound softened on Heritage Audio Recording Equipment?
If the initial hits of your drum/percussion track still sound too softened and blurred using Heritage Audio Recording Equipment, try deactivating the LIMITER or reducing its effect a lot.
Why aren't Compressor and Limiter responding on Heritage Audio Recording Equipment?
If the Compressor and Limiter aren’t responding on your Heritage Audio Recording Equipment, even without BYPASS engaged, ensure both the Compressor and the Limiter have their own IN buttons pressed when you want them to work.
How to fix softened transients on Heritage Audio Recording Equipment?
If the initial hits of your drum/percussion track sound too softened and blurred on your Heritage Audio Recording Equipment, ensure the ATTACK FAST button is not pressed to allow more of the initial transient through unaffected.
How to activate the equalizer on my Heritage Audio ELITE?
If the Equalizer on your Heritage Audio Amplifier doesn't seem to be working, ensure that you have pushed the EQL button to activate it.
How to compress stereo signal evenly on Heritage Audio Recording Equipment?
If your stereo signal levels are uneven when compressing with your Heritage Audio Recording Equipment, ensure you've pressed the LINK button to make the Left channel the main controller for both channels.
What to do if there is still no signal from Heritage Audio Recording Equipment?
If there is still no signal from your Heritage Audio Recording Equipment, make sure the GAIN MAKEUP is not fully turned down.
How to reduce compression on Heritage Audio Recording Equipment?
If you're getting too much compression on your Heritage Audio Recording Equipment, reduce the THRESHOLD and/or the RATIO.
What to do if too many peaks are getting through on Heritage Audio Recording Equipment?
If too many peaks are getting through on your Heritage Audio Recording Equipment, try using the ATTACK FAST button to make the processors react quicker and more aggressively.
What to do if there is no signal from Heritage Audio Recording Equipment?
If there is no signal from your Heritage Audio Recording Equipment, double-check that you have made the right connections with the right cables.
General| Brand | Heritage Audio |
|---|---|
| Model | ELITE Series |
| Category | Amplifier |
| Language | English |
Details on all controls on the front panel, including limit level, attack, release, ratio, gain makeup, bypass, and indicators.
Explanation of rear panel connectors for line inputs, outputs, and power connection to the PSU04.
Diagram and explanation for connecting the HA-609A for bass recording using DI and microphone inputs.
Diagram and explanation for connecting the HA-609A for guitar recording with FX pedals and amp simulation.
Diagram showing how to integrate the HA-609A into a Digital Audio Workstation (DAW) workflow for mixing.
Diagram illustrating the HA-609A's use on a mix bus, potentially with other outboard gear like equalizers.
Solutions for problems concerning the unit not powering on or VU meters not lighting up.
Troubleshooting steps for no signal, low output levels, or incorrect routing in the DAW.
Guidance on managing peak handling, softened transients, and overall compression levels.
Resolving stereo level mismatches and ensuring compressor/limiter controls are functioning correctly.
To Next Page
