Herman Miller Aeron Disassembly For Recycling

HermanMiller Aeron
®
Task Chair & Work Stool Part no. 1BJ678 rev A. 1
. Remove the four back bolts using mm Hex bit.
Step 1
Electric Drill
Tools Required
HermanMiller
Aeron
New Aeron Task Chair & Work Stool
Disassembly for Recycling
.
T Torx driver
Wrench  mm mm, mm Hex bit T, T Torx bit Flat screw driver
Punch
Special punch with recess
HammerSafety Glasses
Nylon cap
Materials Identication and Segregation:
Where possible, plastic components are marked with ASTM recycling codes.
Use these codes to identify material type for recycling. Non marked compo-
nents should be treated as mixed plastic. Ferrous metals can be identied
using a small magnet for recycling. Non-ferrous metals should be separated
and recycled separately.
For more information about our products and services or to see a list of dealers, please visit us at
www.hermanmiller.com or call 888 - 443 - 4357.
© 2016 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BHGYK - A.

Herman Miller Aeron Specifications

General

Chair Type	Office Chair
Weight Capacity	350 lbs
Color Options	Graphite, Carbon, Mineral
Tilt Tension	Yes, adjustable
Warranty	12-year Warranty
Seat Height	16 - 20.5 inches (Size B)
Adjustability	Tilt Limiter
Lumbar Support	Adjustable PostureFit SL
Tilt Limiter	Yes
Armrests	Adjustable
Sizes	A (Small), B (Medium), C (Large)
Material	Die-cast Aluminum