Herman Miller X LOGITECH G EMBODY - User Manual

TO RAISE SEAT:
Angle the joystick fully and li your
weight to raise the seat height to the
desired level.
1. SEAT HEIGHT:
Joystick inside tilt tension knob,
right side of chair
Adjustment Guide1Embody Gaming Chair
TO LOWER SEAT:
While seated, angle the joystick
fully and lower seat.
Get the most out of your chair by
ne-tuning itshighly technical adjustment
features so you can sit exactly how you
want. Get situated at your gaming setup,
sitting the way you usually do, and follow
these steps to enjoy a healthier, more
comfortable gaming experience.
2. TILT TENSION:
Knob below right side of seat
TO INCREASE TENSION:
Turn knob clockwise.
TO DECREASE TENSION:
Turn knob counterclockwise.
TO ENGAGE:
Recline and move tab up to dene
the limit of recline.
TO RELEASE:
Lean forward and flip tab
fully downward.
3. TILT LIMITER:
Back horizontal tab on le side
behind seat
ADJUSTMENT GUIDE
HERMAN MILLER X LOGITECH G
EMBODY
®
GAMING CHAIR

Summary

Seat Height Adjustment

Raise Seat Height

Angle joystick fully and lift weight to raise seat height to desired level.

Lower Seat Height

While seated, angle joystick fully and lower seat.

Tilt Tension Adjustment

Increase Tilt Tension

Turn knob clockwise.

Decrease Tilt Tension

Turn knob counterclockwise.

Tilt Limiter Adjustment

Engage Tilt Limiter

Recline and move tab up to define the limit of recline.

Release Tilt Limiter

Lean forward and flip tab fully downward.

Arm Height Adjustment

Raise Arm Height

Grasp arms, press button underneath, pull up, and release to lock.

Lower Arm Height

Grasp arms, press button underneath, lower, and release to lock.

Arm Width Adjustment

Adjust Arm Width

Place two hands on armpad to pull in or push out. Repeat with other armpad.

Backfit Adjustment

Flat Back Position

Rotate knob clockwise for flat back or slightly back counterclockwise.

Curved Back Position

Turn knob counterclockwise to rotate the back rearward.

Seat Depth Adjustment

Increase or Decrease Seat Depth

Lift thigh weight, lift front handles to disengage, slide seat, then release downward to lock.

Overview

The Herman Miller x Logitech G Embody Gaming Chair is an advanced seating solution designed to provide exceptional comfort and ergonomic support for gamers and individuals who spend extended periods seated. This chair is engineered with a focus on promoting a healthier posture and enhancing the overall sitting experience through a range of highly technical and intuitive adjustment features. The design integrates insights from both Herman Miller's expertise in ergonomic furniture and Logitech G's understanding of the specific needs of the gaming community, resulting in a chair that adapts to the user's body and preferences.

The primary function of the Embody Gaming Chair is to offer a customizable and supportive seating experience that can be fine-tuned to individual body types and sitting styles. It aims to alleviate discomfort and promote better spinal alignment, even during long gaming sessions or work periods. The chair's various adjustments allow users to personalize their seating position, ensuring optimal support for the back, arms, and legs. This adaptability is crucial for maintaining focus and preventing fatigue, contributing to a more enjoyable and productive experience.

One of the core usage features is the Seat Height adjustment. This is controlled by a joystick located inside the tilt tension knob on the right side of the chair. To raise the seat, the user angles the joystick fully and lifts their weight, allowing the seat to ascend to the desired height. Conversely, to lower the seat, the user remains seated and angles the joystick fully downward, enabling the seat to descend. This intuitive control mechanism makes it easy to find the perfect height for any desk or monitor setup.

The Tilt Tension feature, managed by a knob located below the right side of the seat, allows users to control the amount of force required to recline. Turning the knob clockwise increases the tension, making it harder to recline, which is ideal for users who prefer a firmer back support or want to maintain a more upright posture. Turning the knob counterclockwise decreases the tension, allowing for easier recline and a more relaxed sitting experience. This adjustment is vital for personalizing the recline resistance to match individual body weight and preference.

For users who wish to limit their recline, the Tilt Limiter is a crucial feature. This is a horizontal tab located on the left side behind the seat. To engage the tilt limiter, the user reclines to their desired maximum recline position and then moves the tab upward. This sets a defined limit for recline, preventing the chair from going beyond that point. To release the tilt limiter, the user leans forward and flips the tab fully downward, allowing for full recline motion again. This feature is particularly useful for maintaining a specific posture or for tasks that require a more upright position.

The Arm Height adjustment provides personalized support for the user's arms and shoulders. Each arm has a button located underneath the armpad. To raise the arms, the user grasps the arm while pressing the button and pulls the armpad upward to the desired position, then releases the button to lock it in place. To lower the arms, the user follows the same procedure but pushes the armpad downward. This allows for precise positioning of the arms, reducing strain on the shoulders and neck, and ensuring proper alignment with the desk surface.

In addition to height, the Arm Width can also be adjusted. To modify the arm width, the user places two hands on one armpad and either pulls it inward or pushes it outward. This process is then repeated for the other armpad. This adjustment ensures that the arms are positioned comfortably, whether the user prefers them closer to the body or further apart, accommodating different body types and activities.

The BackFit Adjustment is a sophisticated feature designed to support the natural curve of the spine. This is controlled by a knob on the right side behind the seat. For a flatter back support, the user turns the knob clockwise to its full forward position, or slightly back by turning it counterclockwise. For a more curved back support, the user turns the knob counterclockwise to rotate the back rearward. This dynamic adjustment allows the chair to conform to the user's spinal curvature, promoting a healthy posture and distributing pressure evenly across the back.

Finally, the Seat Depth adjustment allows users to customize the depth of the seat pan, ensuring proper leg support and circulation. This is controlled by front handles located on both the right and left sides of the seat. To increase or decrease the depth, the user lifts their thigh weight from the front of the seat, gently lifts up the front handles to disengage the locking mechanism, and then slides the seat forward or backward to the desired depth. Once the desired position is found, the user releases the handles downward to lock the seat. This prevents pressure points behind the knees and ensures that the user's feet are flat on the floor or a footrest, promoting healthy blood flow.

The Herman Miller x Logitech G Embody Gaming Chair is designed for ease of use and long-term durability, with no specific maintenance features mentioned beyond the intuitive adjustment mechanisms. The focus is on empowering the user to fine-tune their seating experience to achieve optimal comfort and ergonomic benefits, making it a valuable investment for anyone seeking a high-performance seating solution.

Herman Miller X LOGITECH G EMBODY Specifications