Herni
III. Handling and functions of the basic seat
3.3 Adusting the height of the back rest
Press the release latch in the handle to move
the headrest up or down. Make sure that the
child's head never looks over the headrest!
Adjust the belt crossbeam of the 5-point belt so
that the belt runs horizontally - see ! Open the
screw connections on both sides. If the height
is adjusted correctly you can tighten the screws
again.
3.4 Adjusting the angle of the back
It is possible to adjust the back angle stepless and
lock it in any position. This ensures that the car
seat is stable in any position. Open the two quick
releases and move the back to the desired
position. Then close the quick release levers to fix
the angle.
• Page 9 •
To Next Page
Loading...