5
GENERAL CONDITIONS
By choosing EUREKA automatic colorant -dispensing machine manufactured by HERO
EUROPE, you have selected a product which represents the result of intensive research in
the field of high-tech fluid-dosing equipment. Top quality material, modern designing tools
such as the use of CAD three-dimensional parametrical systems, together with the
attention given to ergonomics, guarantee an easy to use, long lasting machine.
The machine is in compliance with the 89/392/EEC directive regarding machinery, the
89/336/EEC directive regarding electromagnetic compatibility, as well as the 73/32/EEC
directive regarding electrical equipment to be used within a specific tension range
compiled by the European Community Council of Ministers, and is provided with the EC
trademark.
The handbook explains how to install an HERO EUROPE automatic dispenser and
provides all the necessary information in order to insure easy use and good maintenance.
It is very important to read the handbook carefully and completely before
implementing any task on the dispenser, in order to work with the machine in
perfect conditions
The dispenser carries out sequential dosing of colorant pastes for the production of paints
in the colors requested, by means of progressive cavity volumetric pumps. It is absolutely
forbidden to start the pumps, either by hand or through automatic cycles, if there is
no colorant in the relative tank. Should this occur, irreparable damage would be
caused to the pump.
36 hours is the maximum allowed time between one agitation cicle and the other.
To ensure good functioning of the machine, the few, simple tasks requested must be
implemented within due time and solely by authorized technicians. Good functioning of the
dispenser is guaranteed if the place in which it is installed fulfils the following
characteristics:
· Room temperature: 15÷40°C
· Relative humidity: 30÷90%
The dispenser must be connected to an electric installation with a totally efficient
grounding system.
The dispenser warranty will no longer be considered valid should any of the above
mentioned criteria not be respected.
For technical assistance, please contact the vendor‟s engineering department.
This handbook should be kept in a safe place
To Next Page
Loading...
