Need help?Do you have a question about the Herz pelletstar 10 and is the answer not in the manual?
Overview of the system, warranty, and guarantee information.
Emphasizes qualified personnel for installation, operation, and maintenance.
Covers safe operation, specific steps, and maintenance practices.
Specifies required properties and quality standards for wood pellets.
Explains feeder system, air control, and boiler operation principles.
Details safety devices and operating temperature limits for the equipment.
Describes various states like Heating off, Cold start, Control phase, and Lambda control.
Explains frost protection measures and the lambda control system.
Illustrates the temperature manager's role in managing heat demands.
Guides on initial system start-up and navigating the main menu interface.
Covers settings for Boiler, Buffer, Hot water tank, Heating circuit, Solar, etc.
Details network configuration, Modbus, and email settings for system communication.
Defines terms related to the boiler's operation, temperature, and sensors.
Explains terms for buffer, hot water tank, and heating circuit modules.
Defines terms for solar, hydraulic compensator, net pump, and zone valve modules.
Explains external requirement signals, temperature inputs, and settings.
Lists common maintenance issues that may not trigger display error messages.
Provides a schedule for regular customer inspections and maintenance tasks.
Provides the official address and details of the manufacturer.
General| Fuel Type | Wood pellets |
|---|---|
| Nominal Heat Output | 10 kW |
| Power Supply | 230 V / 50 Hz |
| Flue Gas Temperature | 120°C |
| Control | Touch display |
| Warranty | 2 years |
To Next Page
