Safety Precautions
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure
CAUTION
CLASS 1 LASER PRODUCT
This product complies with IEC 60825-1:2014
(Ed.3) and comlies with FDA performance
standards for laser products except for
conformance with IEC 60825-1 Ed.3, as
described in Laser Notice No.56, dated May 8,
2019.
Handling
This device contains metal, glass, plastic, as well as sensitive
electronic components. Improper handling such as
dropping, burning, piercing, and squeezing may cause
damage to the device.
In case of dropping the device, STOP using the device
immediately and contact Hesai technical support.
To avoid violating the warranty and to minimize the chances
of getting electrically shocked, DO NOT disassemble the
device on your own accord.
In all circumstances, if you suspect that the device
malfunctions or is damaged, stop using it immediately to
avoid potential hazards and injuries. Contact an authorized
Hesai Technology service provider for more information on
device disposal.
Enclosure
This device contains high-speed rotating parts. To avoid
potential injuries, DO NOT operate the device if the
enclosure is loose or damaged.
To ensure optimal performance, do not touch the device’s
enclosure with bare hands. If the enclosure is already
stained, please use a lint-free wipe and strictly follow the
cleaning method in the Sensor Maintenance chapter in
user manuals.
Eye Safety
Although the device meets Class 1 eye safety standards, DO
NOT look into the transmitting laser through a magnifying
device (microscope, eye loupe, magnifying glass, etc.).
For maximum self-protection, avoid looking directly at the
device when it is in operation.
Power Supply
Use only the cables and power adapters provided by
Hesai Technology. Only the power adapters that meet
the device’s power requirements and applicable safety
standards can be used. Using damaged cables,
adapters or supplying power in a humid environment
can result in fire, electric shock, personal injuries,
product damage, or property loss.
Prolonged Exposure to Hot Surface
Prolonged exposure to the device’s hot surface may cause
discomfort or injury. If the device has been powered and
operating for a long time, avoid skin contact with the device
and its power adapter.
Vibration
Strong vibration may cause damage to the device and
should be avoided. If you need the mechanical
vibration and shock limits of this product, please
contact Hesai technical support.
Medical Device Interference
Some components in the device can emit
electromagnetic fields, which may interfere with
medical devices such as cochlear implants, heart
pacemakers and defibrillators. Consult your physician
and medical device manufacturers for specific
information regarding your medical device and
whether you need to keep a safe distance from the
device. If you suspect that the device is interfering with
your medical device, stop using it immediately.
Explosive Atmosphere and Other Air Conditions
Do not use the device in any area where potentially
explosive atmospheres are present, such as high
concentrations of flammable chemicals, vapors or
particulates (including particles, dust, and metal
powder) in the air. Exposing the device to high
concentrations of industrial chemicals, including
liquefied gases that are easily vaporized (such as
helium), can damage or weaken the device’s function.
Please observe all the signs and instructions on the
device.
Copyright 2020 by Hesai Technology.
All rights reserved. In case of discrepancy, the English
version shall prevail.
Light Interference
Some precision optical instruments may be interfered by
the laser light emitted from the device.
Repair
DO NOT open and repair the device without direct guidance
from Hesai Technology. Disassembling the device may
cause degraded performance, failure in water resistance, or
potential injuries to the operator.
Radio Frequency Interference
Please observe the signs and notices on the device
that prohibit or restrict the use of electronic devices.
Although the device is designed, tested, and
manufactured to comply with the regulations on RF
radiation, the radiation from the device may still
influence other electronic devices.
Please keep a copy of this Quick Start Guide and the user manual for future reference.
Safety Notice
Before your first use, make sure to read through this Quick Start Guide and the device's
user manual.
Please find the user manuals:
in the USB disk*, or
at https://www.hesaitech.com/en/download, or
access this webpage by scanning the QR code**
Provided only for certain product models
*
Also available: PandarView (point cloud visualization
software) and SDKs
**
To Next Page
Loading...
Need help?
General
