Why does my new Heta Stove smell and the surface is steaming?
If your Heta Stove smells and the surface is steaming, it's likely that the paint on the stove surface is not yet fully hardened. Ensure there is sufficient ventilation to address this.
Why does my Heta Stove 'clunk'?
If your Heta Stove 'clunks', it's usually due to tension in the metal plates. Adjust the metal plates to resolve this.
Why does my Heta Stove tick?
If your Heta Stove ticks, it's due to normal expansion and contraction caused by temperature changes. Ensure that the temperature in the combustion chamber is as constant as possible.
Why does my Heta Stove creak?
If your Heta Stove creaks, it indicates that the temperature in the combustion chamber is too high. Consult the operating instructions for guidance.
Check the stove for damage upon receipt and dispose of packaging materials properly.
Covers pre-use checks, first firing, lighting, airflow regulation, and refueling.
Details ash removal, safe burning, hazards, fuel selection, and chimney draft.
Addresses operational problems, chimney fires, general maintenance, and glass cleaning.
A guide for resolving faults, maintenance schedules, and stove data plate information.
Details requirements for installing the stove, including distance, floor, and chimney connection.
Covers combustion air, ventilation needs, and clearance requirements for safe installation.
Provides key technical data, emissions, and output specifications for the stove.
Information regarding the stove's suitability for use in smoke control areas.
General| Fuel Type | Wood |
|---|---|
| Flue Gas Outlet | Top or Rear |
| Type | Wood Burning Stove |
| Heat Output | 6 kW |
| Flue Size | 150 mm |
| Material | Steel |
| Door Glass | Ceramic glass |
To Next Page
