Need help?Do you have a question about the Hexagon JOGBOX and is the answer not in the manual?
General| Brand | Hexagon |
|---|---|
| Model | JOGBOX |
| Category | Remote Control |
| Language | English |
Initiates an emergency stop by pressing the button, halting CMM drives.
Details critical safety warnings regarding live parts, maintenance, and equipment integrity.
Covers operator protection devices and the need for regular checks and reporting of malfunctions.
Latching pushbutton interrupts motor drive circuits, causing an ESTOP condition when depressed.
Knob for variable increase or decrease of machine movement speed.
Press and hold to allow machine movement with joystick, preventing unintended motion.
Enables manual axis movement at variable speeds via DC servo motors.
Enables servo drive system power and starts homing procedure by pressing and holding.
Indicates probe status (enabled, ready, or temporarily disabled) for operator awareness.
SHIFT accesses lower registers; Axis buttons constrain movement to selected axes.
Unlock buttons enable joystick; DEL PNT deletes points; MOVE POINT learns positions.
Two-function button to stop (HOLD) or resume (RUN) program execution.
PROBE/PART/MACH LEDs show motion mode for accurate steering.
SLOW controls movement speed; DONE accepts software commands.
Enter passcode to log in as Operator or Programmer.
Change passkey, machine picture, language, and set logout time.
Adjust volume, mute sounds, change backlight brightness, and set timeout.
Configure operator and programmer logout timeouts based on inactivity.
Shows current axis positions and coordinates for operator reference.
Swipe right from Home Page to access the Settings page.
Swipe right to access Routine page for selecting and viewing routines.
Swipe down from Routine Page to enter Jog Mode for manual control.
Options to load recent, favorite, or browse routine programs.
Displays routine execution results including pass/fail counts and time.
Navigating within Jog Mode XYZ for controlling axes via swipes.
Displays routine status (paused, errors) with options for retry or continuation.
Feature to take pictures or mark routines as favorites.
Displays PC-generated alerts like Crash Detected or Controller Errors.
Shows specific error messages from the PC requiring operator action.
To Next Page