TESA NIVELTRONIC
8
7 DELIVERY PROGRAMME
TESA NIVELTRONIC electronic levels
Measuring instruments with analogue indication
and output. Scale division (sensitivity) is 0,05
and 0,01 mm / m. Power supply ensured by 4
batteries LR 03, 1,5 V.
Executions:
Square model
2 flat and 2 prismatic measuring faces at right
angle to one another. For measuring shafts with
diameters ranging from 20 to 120 mm. Base
length: 200 mm.
No. 03130060
Horizontal model
1 flat measuring face designed for attaching a
granite sole plate (see below).
Base length: 150 mm.
No. 03130063
7.1 Optional accessories
Granite sole plates
Length: 200 mm No. 03160007
250 mm No. 03160008
500 mm No. 03160009
Holder with built-in voltage regulator
4, 65 V
1 battery set
No. 03160048
1 Set = 4 batteries
Type LR 03, AAA, 1,5 V
No. 04761059
Note:
For powering the TESA NIVELTRONIC supplied
at an earlier date, the aforementioned holder
along with batteries (No. 03160048) is suitable.
To Next Page