TESA NIVELTRONIC
9
8 TECHNICAL DATA
Type Electronic levels with analogue indication
Principle Pendulum with built-in inductive sensor
Measuring ranges
Range 1 ± 0,75 mm / m and ± 150 arcsec
Range 2 ± 0,15 mm / m and ± 30 arcsec
Scale divisions
Range 1 0,05 mm / m and 10 arcsec
Range 2 ± 0,01 mm / m and ± 2 arcsec
Main body Solid cast iron body. Horizontal model designed for attaching an extra granite
sole plate.
Measuring faces
Horizontal model 1 flat face 150 x 45 mm
Square model 2 flat faces 200 x 45 mm and 2 prismatic faces for Ø 20 à 120 mm
Max. permissible error
DIN2276
Up to the half of the full scale: max. 1 % of the indicated value.
From half up to full scale: max. 1 % of (2x indicated value – 0,5x full scale)
Repeatability 0,001 mm / m
Interface Analogue output ≈ ± 0,2 + V – Impedance 5 kΩ
Operating temperature
range
+ 10 to + 30 °C
Storage temperature range – 20 to + 60 °C
Electromagnetic
compatibility
EN 50081-1 / -2
EN 50082-1 / -2
Standard DIN 2276, Part 2 (Forme D)
Power supply 1 set of 4 batteries, type LR 03, AAA, 1,5 V
Weight
Horizontal model 3,7/6,3 kg (without wooden case)
Square model 4,4/6,9 kg (with wooden case, without granite sole plate)
Marking Identification number
Delivery Provided with a declaration of conformity, instruction manual and wooden case
Optional accessories
Granite sole plates for the
horizontal model
Width: 50 mm
Length: Weight:
200 mm 1,05 kg
250 mm 1,50 kg
500 mm 5,95 kg
To Next Page