Do you have a question about the Hi-flying Elfin-EW1 Series and is the answer not in the manual?
Model | Elfin-EW1 Series |
---|---|
Category | Adapter |
Ethernet | 10/100Mbps |
Safety Standards | CE, FCC, RoHS |
Interface | Ethernet |
Storage Temperature | -40°C to 85°C |
Protocols | TCP/IP, UDP, DHCP, DNS |
Describes the 4-pin connector for the Elfin-EW10 model.
Describes the 4-pin connector for the Elfin-EW11 model.
Describes the 8-pin connector for the Elfin-EW10 model.
Describes the 8-pin connector for the Elfin-EW11 model.
Details the RJ45 cable and its connections.
Guide to downloading and using SecureCRT for serial communication.
Steps to configure serial port parameters for communication.
Explains how devices connect to the product's AP in AP mode.
Details how to perform a TCP server test while the device is in AP mode.
Explains how to configure the device to connect to a router in STA mode.
Details how to perform a TCP server test when the device is in STA mode.
Lists the IOTService Configure Software download link.
Provides a download link for the Smartlink V8 application.
Links to additional application notes and manuals.