Hi-Target Qbox Series - Key Function

Hardware
6
1.1.2. Key function
Qbox 5/6
Power on: Long press power key one second, green indicator lights up, loose
the power key;
Power off: Long press power key two seconds, green indicator light go out,
loose the key;
Force shut down: After starting up，long press the power key six seconds,
green indicator light go out, loose it to force shut down.
Qbox 8
Power on: Long press power button for 1 second to power on. The three lamps
will flash green.
Power off: Long press power button for 3 seconds to power off. The signal
lamp and satellite lamp will flash at the same time.
Power button:
 Double press power button to switch work mode, if signal lamp is on,
means working in RTK mode, if signal lamp is off, means working in
static mode;
 Short press power button for 1 second to inquire power capacity;
 Long press power button for 6 seconds to reset mainboard;