Need help?Do you have a question about the HIAB 190T and is the answer not in the manual?
General| Brand | HIAB |
|---|---|
| Model | 190T |
| Category | Lifting Systems |
| Language | English |
Detailed technical specifications including dimensions, capacities, and operating parameters.
Diagram illustrating the overall structure, dimensions, and key features of the crane.
Table and diagram showing lifting capacities at various working radii and boom angles.
Schematic illustrating the hydraulic system layout and components of the crane.
Explanation of the fundamental principles behind the crane's operation and power source.
List and identification of the primary structural and functional components of the crane.
Description of the crane's base structure and its mounting on the chassis.
Details about the column structure, its connection to the base, and mounted systems.
Explanation of the boom system, including main boom, extensions, and cylinders.
Description of the crane's control valves and their functions for operation.
Details on the outrigger system, its components, and its role in stabilizing the crane.
Description of the winch system, including its motor, gearbox, and drum.
Explanation of the Power Take-Off (PTO) and hydraulic pump system.
Description of the oil tank and its components for the hydraulic system.
Details about the top seat, control valve, and acceleration pedal for operator control.
Explanation of the Over Load Protection (OLP) system and its function.
Description of the Anti-two block system and its role in preventing over-winding.
Essential steps and checks to perform before starting crane operation.
Procedure for warming up the crane's hydraulic system in cold weather conditions.
Instructions for operating the outrigger system, including lever functions and stability.
Explanation of the crane's operation using the control levers and their functions.
Details on the over winding alarm system, its activation, and response procedures.
Steps for securing the crane and preparing it for driving after operation.
Checklist for daily inspection of various crane components and systems.
Guidance on inspecting slewing bearing and mounting bolts for noise and looseness.
Instructions on how to fit, adjust, and maintain the wire rope.
Procedure for changing the hydraulic oil filter inserts in the system.
Key points to inspect while the crane is in operation.
Checks to perform after completing crane operations.
Maintenance tasks and checks required after one month of crane operation.
Maintenance tasks and checks required after six months of crane operation.
Procedure for changing the hydraulic oil and related maintenance steps.
Chart detailing lubrication points, intervals, recommended lubricants, and quantities.
To Next Page