Need help?Do you have a question about the HIAB Hooklift Multilift XR21S and is the answer not in the manual?
General| Brand | HIAB |
|---|---|
| Model | Hooklift Multilift XR21S |
| Category | Lifting Systems |
| Language | English |
Overview of the MULTILIFT XR hooklift equipment as a container loading/unloading device.
Explanation of the 2GCC control unit, its buttons, and functions.
General safety rules and precautions for operating the hooklift equipment.
Specific safety guidelines for the driver during general operation.
General safety advice and instructions for maintenance procedures.
Step-by-step instructions and safety precautions for loading/unloading containers.
Safety warnings and conditions to avoid when tipping a container.
Pre-operation checklist and safety measures before driving the vehicle.
Detailed procedure for loading a container onto the hooklift equipment.
Step-by-step guide for safely tipping a container.
Detailed procedure for safely unloading a container.
Visual identification and listing of the primary components of the hooklift.
Overview of the hydraulic system components and their functions.
Explanation of the "third" speed setting for faster container demounting.
Control of equipment movements for safe and easy container operations.
Explanation of service notifications ('SERV', 'SDUE') on the display.
General safety precautions and guidelines for performing service work.
Schedule of daily, weekly, monthly, and annual maintenance tasks.
Safety warnings and procedures for servicing hydraulic components.
Step-by-step instructions for changing the hydraulic oil and filter.
Checks to verify the correct operation of safety features during various movements.
Manual operation of control valves in case of electrical system failure.
Information on reading and interpreting diagnostic codes from the PLC.
Continuation of fault codes, causes, and consequences.
Continuation of conflict codes, causes, and consequences.
Continuation of diagnosis codes, causes, and consequences.
Explanation of error code categories (Low, Medium, Severe) and their implications.
Guidelines on lubrication intervals and types of grease to use.
To Next Page