Hibon NX 12 - User Manual

80446693
Revision B
August 2013
Save These Instructions
NX Blowers
Installation, Operation and Maintenance
Installation, Operation and Maintenance
EN
Instalación, operación y mantenimiento
ES
Installation, fonctionnement et entretien
FR
Installation, Betrieb und Wartung
DE
Installazione, funzionamento e manutenzione
IT
Authorized Hibon Distributor, Service & Repair Facility
120 – 10293 276 ST, Acheson, Alberta, Canada T7X 6A5
T: 7
80.962.1827 F: 780.962.1830 E: sales@fraserwoods.ca
www.fraserwoods.ca

Summary

Installation, Operation and Maintenance

2. TECHNICAL DATA

2.1 Operating and Storage Conditions

2.2 Mechanical Data

2.3 Performance

Lists performance metrics like pressure, speed, and power.

2.5 Lubrication Data

3. INSTALLATION

3.1 Installation Safety

Provides essential safety warnings and precautions for installing the blower.

3.2 System Design and Safety

Outlines requirements for designing a safe and compliant system.

3.3 Unpack and Inspect

3.4 Prepare, Locate and Connect Blower

Instructions for positioning and connecting the blower, covering direct and foot-mounted installations.

3.5 Fill Blower with Oil

3.6 Fit Drive;Transmission

Details on attaching the drive system and pulley specifications.

3.7 Check Direction of Rotation

3.8 Commissioning the Blower

Steps to prepare and start the blower after installation.

4. OPERATION

4.1 General Operational Safety

General safety rules for operating the blower.

4.2 Start-up

Procedure for safely starting the blower.

4.3 Shut-down

5. MAINTENANCE

5.1 Safety Information

Safety precautions for performing maintenance.

5.2 Maintenance Plan

5.3 Checking Oil Levels

5.5 Changing the Oil

5.6 Overhaul the Blower

5.7 Fault Finding

A guide to troubleshooting common blower problems and solutions.

6. STORAGE AND DISPOSAL

Hibon NX 12 Specifications

General

Brand	Hibon
Model	NX 12
Category	Blower
Language	English