Hibon NX 18 - User Manual

80446693
Revision B
August 2013
Save These Instructions
NX Blowers
Installation, Operation and Maintenance
Installation, Operation and Maintenance
EN
Instalación, operación y mantenimiento
ES
Installation, fonctionnement et entretien
FR
Installation, Betrieb und Wartung
DE
Installazione, funzionamento e manutenzione
IT
Authorized Hibon Distributor, Service & Repair Facility
120 – 10293 276 ST, Acheson, Alberta, Canada T7X 6A5
T: 7
80.962.1827 F: 780.962.1830 E: sales@fraserwoods.ca
www.fraserwoods.ca

Summary

INTRODUCTION

TECHNICAL DATA

Operating and Storage Conditions

Mechanical Data

Provides physical dimensions and mass for different NX blower models.

Performance

Details performance metrics like differential pressure, speed, and power.

Lubrication Data

Connections

INSTALLATION

Installation Safety

Provides essential safety precautions and warnings for blower installation.

System Design and Safety

Guides system design to ensure safe and optimal blower operation.

Unpack and Inspect

Prepare, Locate, and Connect the Blower

Step-by-step guide for positioning and connecting the blower to the system.

Fill the Blower with Oil

Instructions on checking and filling the blower with the correct grade of oil.

Fit the Drive;Transmission

Guidance on connecting the drive system, including pulley diameter recommendations.

Check the Direction of Rotation

Procedure to verify the blower rotates in the correct direction after installation.

Commissioning the Blower

OPERATION

General Operational Safety

Key safety warnings and precautions during blower operation.

Start-up

Shut-down

MAINTENANCE

Safety Information

Maintenance Plan

Check the Oil Levels

Change the Oil

Fault Finding

Troubleshooting guide for common symptoms and their causes.

Hibon NX 18 Specifications

General

Stages	Single stage
Frequency	50/60 Hz
Nominal Volume Flow	18 m³/h
Airflow	18 m³/h
Voltage	230 V / 400 V