Hibon NX 26 - User Manual

80446693
Revision B
August 2013
Save These Instructions
NX Blowers
Installation, Operation and Maintenance
Installation, Operation and Maintenance
EN
Instalación, operación y mantenimiento
ES
Installation, fonctionnement et entretien
FR
Installation, Betrieb und Wartung
DE
Installazione, funzionamento e manutenzione
IT
Authorized Hibon Distributor, Service & Repair Facility
120 – 10293 276 ST, Acheson, Alberta, Canada T7X 6A5
T: 7
80.962.1827 F: 780.962.1830 E: sales@fraserwoods.ca
www.fraserwoods.ca

Summary

NX Blowers

Installation, Operation and Maintenance

Provides instructions for installing, operating, and maintaining NX Blowers.

2. TECHNICAL DATA

2.3 Performance

3. INSTALLATION

3.1 Installation safety

Crucial safety precautions to follow during the installation of NX blowers.

3.2 System design and safety

Guidelines for designing a safe system for blower installation and operation.

3.3 Unpack and inspect

3.4 Prepare, locate and connect the blower

Steps for preparing, positioning, and connecting the blower into the system.

3.4.3 Prepare, locate and connect a blower supported by mounting feet

3.5 Fill the blower with oil

Procedure for correctly filling the blower with the appropriate grade and level of oil.

3.6 Fit the drive;transmission

Instructions for connecting the drive system and ensuring proper pulley diameters.

3.7 Check the direction of rotation

3.8 Commissioning the blower

Steps for preparing and starting up the blower for normal operation.

4. OPERATION

4.1 General operational safety

General safety rules to follow during blower operation to prevent injury or damage.

4.2 Start-up

Procedure for safely starting up the NX blower.

4.3 Shut-down

5. MAINTENANCE

5.1 Safety information

Essential safety precautions to be observed before and during maintenance.

5.2 Maintenance plan

5.3 Check the oil levels

5.3.1 Inspect the oil-level sight-glasses

5.3.2 Drive Head Plate

5.3.3 Non-drive Head Plate

5.5 Change the oil

Detailed steps for draining and refilling the blower with oil.

5.5.1 Drive Head Plate

5.5.2 Non-drive Head Plate

5.6 Overhaul the blower

5.7 Fault finding

A guide to identifying and resolving common blower operational faults.

7. SERVICE AND SPARES

7.3 Spares and repair kits

Hibon NX 26 Specifications

General

Brand	Hibon
Model	NX 26
Category	Blower
Language	English