Rear brake
Coollight
Electric brake
Bell
2. Product Overview
1. Unfold the stem and push it until you hear a click.
Then unfold the kickstand to support the scooter.
3. Screw four of the screws provided(two on each side)
with the provided Allen wrench.
4. Ensure your scooter powers on and off.
2. Slide the handlebar onto the stem.
Make sure it's right way round.
3. Assembly
Control Panel
Power Button
Battery Indicator
Light
Mode
Cruise
Unplug the scooter charger, click the power button to turn on the scooter. Hold down the power button for three seconds to turn off
the scooter.
The power level is indicated by five power lights on the control panel.
When the scooter is on, one-tap will turn on/off the front light and side LED lights.
Triple to turn on / off the cruise control function.
Double-tap to change the riding mode. Green indicates sports mode, and not light indicates comfort mode.
32
Ｓ
Ｍph Ｋm／h
S
To Next Page
Loading...
