To Next Page

To Previous Page

_____________________________________________________________________________________________________

HID Corporation 9292 Jeronimo Road Irvine, CA 92618-1905 USA TEL (949) 598-1600 (800) 237-7769 FAX (949) 598-1690

Web page, E-mail - www.hidcorp.com - Miniprox Installation Manual 5365-910 Rev 1

Hold

Blue

TB1-9

---

Card Present

Violet

TB1-10

Testing and Operation

•

When power is applied to the reader the LED will

flash green three (3) times while the beeper beeps

simultaneously. The LED will then turn red. This

indicates that the microcontroller is operating

properly.

•

Present an ID card to the reader. The LED will

momentarily turn green while the beeper beeps once,

indicating that the card was read successfully.

Important Product Specifications

Power requirements (linear supply)

Operating Voltage Range 5.0 – 16.0 VDC

Absolute Maximum Voltage 18 VDC

Peak Current 80 Ma

Average Current 5V or 12V 20 Ma

Maximum cable distance 500 ft (153 m)

To host

FCC Compliance Statement:

This device complies with

part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept

any interference received, including interference that

may cause undesired operation.

Questions and Answers:

Need help?

Do you have a question about the HID Miniprox and is the answer not in the manual?

HID Miniprox Specifications

General