Need help?Do you have a question about the HID MaxiProx DFM Reader - 5375 and is the answer not in the manual?
General| Model | 5375 |
|---|---|
| Frequency | 125 kHz |
| Power Supply | 5-16 VDC |
| Weight | 0.5 lbs (227 g) |
| Operating Temperature | -40 to 70 °C |
| Operating Humidity | 0% to 95% non-condensing |
| Cable Distance | Up to 500 ft (152 m) |
| Card Compatibility | HID Prox |
| Output Format | Wiegand |
| Form Factor | Wall Mount |
| Type | Proximity Card Reader |
| Interface | Wiegand, RS232, or RS485 |
| Current Requirements | 100 mA (typical) |
Steps to determine the mounting position and prepare the installation site.
Guidelines for physically attaching the MaxiProx reader to a mounting surface.
Guidance on routing and connecting the interface cable from the reader to the host.
Detailed instructions for making terminal connections for the reader's cable.
Configuration of internal switches and jumpers for reader functionality and interfaces.
Requirements and considerations for the reader's power supply for optimal operation.
Detailed requirements for the power supply to ensure proper reader operation.
To Next Page
