Do you have a question about the HID ProxPoint and is the answer not in the manual?
Technology | Proximity |
---|---|
Frequency | 125 kHz |
Color | Black |
Material | Polycarbonate |
Power Supply | 5-16 VDC |
Operating Humidity | 0-95% non-condensing |
Card Compatibility | HID Proximity 125 kHz cards |
Output Format | Wiegand, Clock-and-Data |
Supported Card Formats | 26 - 37 bit |
Housing Material | Polycarbonate |
Lists components provided with the ProxPoint reader, including the reader itself, mounting screws, and manual.
Lists optional components required for installation, such as wire splices and power supplies.
Step-by-step guide for physically installing the reader, including drilling holes and securing the device.
Details on wiring the reader to the host system using the provided table and following installation guides.
Describes reader startup behavior and successful card presentation feedback via LED and beeper.
Key technical details including operating voltage, current, and maximum cable distances for optimal performance.
States compliance with FCC rules, outlining conditions for operation and interference.