HID Signo 25B - Specifications

HID® Signo™ 25B Installation Guide
Powering
Trusted Identities
October 2020PLT-04027, Rev. B.1 3
4. Power and test the 25B
5. Download and install HID Biometric Manager
Visit https://www.hidglobal.com/signo25b and download the HID Biometric Manager
Installer. Once the .exe file has downloaded, double-click the file to install HID
Biometric Manager, following the on-screen prompts.
For further details, refer to the HID Signo Biometric ManagerAdministration Guide
(PLT-04029), which is available for download from:
https://www.hidglobal.com/signo25b
Specifications
INPUT VOLTAGE
CURRENT
OPERATING TEMPERATURE
STANDBY AVG
1
MAX AVG
2
PEAK
3
12 VDC 800 mA 1.5 A 2 A -4° F to 150° F (-20° C to 66° C)
1
Standby AVG - Root Mean Square current draw without a card in the RF field.
2
Maximum AVG - Root Mean Square current draw during continuous card reads. Not evaluated by UL.
3
Peak - highest instantaneous current draw during RF communication.
Light bar.
Turn on the power.
The reader should beep and the light bar should flash.
Test the reader with a card.
The reader should beep and the light bar should flash.
Biometric reader (requires set up in HID Biometric Manager)