HID VertXHID V2000 User Manual

Quick Installation Guide
V2000 READER INTERFACE / ACCESS
CONTROLLER
PROPRIETARY INFORMATION. This document contains proprietary information which may not be duplicated,
published or disclosed to others, or used for any purpose without written permission from HID Corporation. 2004
© HID Corporation. All rights reserved.
Document Version 1.0
August 12, 2005
Document Number 6080-906B
9292 Jeronimo Road
Irvine, CA 92618-1905

HID VertXHID V2000 Specifications

General

Number of Doors	2
Number of Readers	2
Outputs	4
Communication Interface	Ethernet, RS-485
Power Supply	12-24 VDC
Operating Temperature	0°C to 70°C
Humidity	0% to 95% non-condensing
Weight	0.45 kg
Inputs	8 supervised inputs

Summary

Step 1 Preparations

1.2 V2000

Steps for preparing the V2000 unit, including cover removal and battery installation check.

Step 2 Hardware Installation

2.1 Mounting Instructions

Instructions on how and where to securely mount the V2000 controller for optimal installation.

2.2 Wiring VertX

Detailed guide for connecting the V2000 to network, power, alarm inputs, readers, and outputs.

Step 3 Communications Configuration

3.1 Firewall Configuration

Configuring firewall settings to allow necessary TCP data transfer for the VertX controller's operation.

3.2 Computer to VertX Controller Connection

3.3 Windows TCP/IP Configuration

3.3.1 Windows XP Computers

Step-by-step guide for configuring TCP/IP settings on Windows XP for the VertX controller connection.

3.3.2 Windows 2000 Computers

Step-by-step guide for configuring TCP/IP settings on Windows 2000 for the VertX controller connection.

3.3.3 Windows Millennium Computers

Step-by-step guide for configuring TCP/IP settings on Windows Millennium for the VertX controller connection.

3.4 How to Edit Configuration Files

3.4.2 Accessing the Installer Tools

3.5 DHCP TCP/IP Addressing

3.5.1 Configuration File Edits

3.5.1.1 /mnt/flash/TaskConfig/CommCfg (DHCP)

3.5.1.2 /mnt/flash/TaskConfig/CommHosts (DHCP)

3.6 Static TCP/IP Addressing

3.6.1 Configuration File Edits

3.6.1.1 /mnt/flash/etc/conf.d/net.eth0 (Static)

3.6.1.2 /mnt/flash/etc/conf.d/hostname (Static)

3.6.1.3 /mnt/flash/resolv.conf.def (Static)

3.6.1.4 /mnt/flash/TaskConfig/CommCfg (Static)

3.6.1.5 /mnt/flash/TaskConfig/CommHosts (Static)

Step 4 Reboot and Test with the Central Station

4.1 Calibrate Input

Central Station Automation Provider Instructions

Dice Corporation

Pre-Installation Checklist