Hidoes HD-B6 - Fender and Bell Installation

8
21
Use a tool to tighten the screws
to secure the front fender into
the middle of the front fork
20
Align the front fender with the
hole on the front fork
22
Each pedal comes with an "L"
sticker or "R" sticker that
identifies it as the left or right
pedal
23
By turning the right pedal
clockwise and the left pedal
counterclockwise with your
hand,Use tools to tighten pedal
screws
24
Remove the screws from
the bicycle bell and attach
the bell to the handlebar
tube.
19
Remove the screws in the
center of the front fork