15
Battery & Charging
First Charge
It is important to fully charge the battery before your first use of the electric bike.
Your electric bike’s battery comes with these built-in features:
1. Balanced charging protection: During charging, the battery automatically balances the voltage among the internal
cells to protect each cell.
2. Over-charging protection: The battery stops charging automatically when full to protect against damage.
3. Over current protection: The battery automatically stops charging if the voltage is higher than prescribed voltage to
protect the battery.
4. Over discharging protection: The battery automatically stops discharging when its voltage drops below Under
voltage value to protect the battery.
5. Short-circuit protection: the battery automatically stops output in the case of a short-circuit.
How to charge
1. Do not charge indoors.
2. Ensure that electric bike is TURNED OFF. Connect external power charger to electric bike.
3. Connect charger to electrical outlet, then turn on the power of electrical outlet.
4. Do not charge the batteries in temperatures below 41F/5° C or above 104F/40° C. The battery may stop the charging
process.
5. The charger lights up RED- The battery is charging. The charger lights up GREEN – The battery is fully charged.
6. After the battery is fully charged, please unplug the charger in time.
To Next Page
Loading...
