Need help?Do you have a question about the Hifonics Brutus BRZ 1200.1D and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Peak Power | 2400 Watts |
| THD at Rated Power | < 0.1% |
| Signal to Noise Ratio | >95dB |
| Input Sensitivity | 0.2V - 6V |
| Low-Pass Crossover Frequency | 50 Hz - 250 Hz |
| Bass Boost | 0 to +12 dB |
| Bass Boost Frequency | 45 Hz |
| Fuse Rating | 120A |
| RMS Power at 1 Ohm | 1200 Watts |
| Frequency Response | 10 Hz |
| Crossover Type | Variable Low-Pass |
| Subsonic Filter | 10 Hz |
| Phase Shift | 0-180 degrees |
Describes the high performance and features of the BRUTUS BRZ Series amplifiers.
Discusses the importance of system design for successful car audio installations.
Provides guidance on mounting and physical installation of the amplifier.
Details proper wiring of power and ground connections using appropriate gauge wires.
Outlines connection order and safe power-up steps for the installed system.
Explains the controls and indicators for the BRZ1200.1D and BRZ1700.1D amplifiers.
Details the controls and indicators for BRZ2100.1D, BRZ2400.1D, and BRZ3000.1D PRO.
Describes Line Inputs, Level (GAIN) control, and their setup.
Details basic and dual subwoofer applications for the BRZ1200.1D amplifier.
Outlines basic and dual subwoofer applications for the BRZ1700.1D amplifier.
Covers single, dual, and linked amplifier applications for specific models.
Guide to optimizing Subsonic, Bass EQ, Low Pass, Phase, and Level settings.
Addresses diagnostics, overheating, power, fuses, and noise problems.
Comprehensive list of technical specifications, power ratings, and connectors.
Details warranty coverage, exclusions, and responsibilities.
Explains the Maxx-Link for linking amplifiers and its key features.
Describes MX-1 Level Converter and MX-3 Bass Controller accessories.
To Next Page