Hifonics Titan TXi6408 User Manual

Discusses system design factors and optimal amplifier mounting for heat dissipation.

Provides guidance on wiring, ground connections, and cable routing to minimize noise.

Details required wire gauge, fuse placement, and secure chassis grounding for amplifiers.

Outlines the correct order for connecting amplifier cables to prevent damage.

Step-by-step guide for safely powering on the audio system for the first time.

General capabilities including impedance handling, tri-mode, and crossover filters.

Specific features and crossover functions for the 2-channel models.

Features and mode selection for the 4-channel amplifier models.

Details on the 1-channel A/B-class mono amplifier's controls and capabilities.

Features of the 1-channel D-class mono block amplifiers including crossover settings.

Basic setup for using the 2-channel amplifier in a full-range stereo configuration.

Instructions for mono bridging a 2-channel amplifier for a single subwoofer or speaker.

Configuring a 2-channel amp for highs and lows in a 2-way active system.

Using a 4-channel amplifier as four discrete full-range channels.

Bridging channels of a 4-channel amp for 2 or 3 channel operation.

Setting up a 4-channel amp for highs and mono bass in a 2-way active system.

Variation for bi-amplified systems using front/rear fade control for highs and bass.

General application guide for the 1-channel A/B class mono subwoofer amplifier.

General application guide for D-class mono subwoofer amplifiers.

Instructions for connecting two subwoofers in parallel to the mono amplifier.

Detailed feature comparison for TXi4008 and TXi6008 models.

Detailed feature comparison for TXi4408 and TXi6408 models.

Detailed feature comparison for TX17508, TXi1008D, and TXi15080 models.

Initial setup and adjustment of High Pass, Low Pass, Bass EQ, and Level controls.

Setup for mono amps including Subsonic, Phase, and level matching.

Matching amplifier input sensitivity and balancing levels across speakers.

Identifying causes for the amplifier's protect mode and troubleshooting steps.

Addressing causes of amplifier overheating and improving airflow.

Steps to diagnose and resolve issues with low amplifier output power.

Reasons why amplifier fuses might blow and how to prevent it.

Diagnosing why the audio system fails to turn on.

Categorizing and troubleshooting hiss and electrical interference noise.

Finding and fixing noises that change with engine speed.

Troubleshooting persistent whining noises in the audio system.