Need help?Do you have a question about the Hifonics Generation XI and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| RMS power at 4 Ohms | 500W x 1 |
| RMS power at 2 Ohms | 800W x 1 |
| Signal to Noise Ratio | >95dB |
| Frequency Response | 10Hz - 180Hz |
| Input Sensitivity | 200mV - 6V |
| Operating Voltage | 10V - 16V |
| Phase Shift | 0 - 180 degrees |
Details features of Cyclops and Hercules amplifiers, including impedance, crossover, and diagnostics.
Lists output power ratings, miscellaneous specs, and connector types for the amplifiers.
Explains the functions of LEVEL, BASS EQ, LOWPASS, and SUBSONIC controls on the front panel.
Describes RCA, DIN, and RJ11 connectors for input, output, and remote level control.
Illustrates basic mono subwoofer connection and wiring for parallel woofers.
Guidelines for connecting RCA interconnect cables and loudspeaker wires.
Advice on cable routing, power, and ground connections to prevent electrical noise.
Step-by-step procedure for safely connecting and powering on the amplifier system.
Instructions for adjusting level, crossover, and EQ controls for optimal sound quality.
Addresses overheating, low power, blown fuses, no turn-on, and noise problems.
Details the one-year warranty, online registration, and exclusions for defects and damages.
To Next Page