HiFuture Ultra2 Pro - Advanced Features and Maintenance; Bluetooth Calling Setup; Strap Replacement; Charging the Device

Replace the strap
Slide the spring pin and hold it to remove the watch strap,
Then connect the watch strap that needs to be replaced to
the watch.
Charging
To charge the watch, place the watch at and make sure
that the back of the two metal holes are aligned with the
metal tip of the charging head.
Phone Calls
1.Ensure the Ultra2 Pro is connecting with & nearby your
phone within 10 meters .
2.ENABLE the Call functions.
3.Go call settings in the Glot APP.
Ultra2 Pro-XXX
MAC: f8:02:b7:f1:c9:f9
Battery:
Bluetooth Call
Enable Bluetooth Call
Step 1
Step 2
Step 3
Ultra2 Pro-xxx
Turn on the Bluetooth call switch on the watch interface
Please enable it in the Bluetooth system settings:
Settings -> Bluetooth -> Other Devices, select
Bluetooth
Bluetooth
Device
Ultra2 Pro
Connected
Ultra2 Pro-xxx
Other Device
Bluetooth
Bluetooth
Settings
Device
Ultra2 Pro-xxx
Connected
Ultra2 Pro-xxx
Connected
Other Device
Bluetooth
Bluetooth
Device
Ultra2 Pro-xxx
Connected
Ultra2 Pro-xxx
Connected
Other Device