EasyManua.ls Logo

high pointe EC942K9E - Setting Defrost by Weight

high pointe EC942K9E
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Example: to defrost 1lb. of food with the default power
level and cook time determined automatically:
Setting Defrost by Weight
1. Press pad once.
0.0 will
appear in the display.
2. Use the numeric pads to input weight
of food to defrost in pounds (10 = 1lb.)
You may enter any weight from 0.1 to
6.0lbs.
3.
Special notes for defrosting by time
Example: to defrost food with the default 30% power level
for 5 minutes:
Setting Defrost by Time
1. Press pad once.
0:00 will
appear in the display.
2. Use the number pads to enter desired
defrost time (defrost time may be set
up to 99 minutes and 99 seconds).
3.
Note: The weight amount must be a valid entry for this
feature to start. A valid weight entry is 0.1 to 6.0 pounds.
Note: Power levels cannot be changed for both defrost (by
weight) or defrost (by time) because the defrost performance
will be adversely affected.
count down remaining defrost time. The oven will beep
twice during the defrost cycle. At this time open the door
and turn the food if needed and remove any portions that
resume the defrost cycle.
When heating has finished you will hear beeps.
When heating has finished you will hear beeps.
When defrosting has finished you will hear beeps .
After pressing START key, the display will
have already thawed. Touch the START key to
Press START/+30sec. pad.
Press START/+30sec. pad.
Defrost Time
Defrost Weight
Example: to quickly heat for 2 minutes at 100% power:
Touch number pads 1, 2 or 3 for desired
minutes of cook time.
Microwave heating or cooking may be quickly set at 100%
power level for 1, 2 or 3 minutes. Use the number keys 1, 2
or 3 to choose the desired minutes of cook time (this option
will only work using the 1, 2 or 3 numeric pads):
Defrost (by weight) feature.
1
3
2
Note: the Ready Set function cannot be set when using the
Using Ready Set
Exhaust High / Low / Off
The exhaust ventilation moves steam and other cooking
vapors from the cooking surface of the range below the
microwave oven.
To operate the exhaust vent, Touch the
highest speed setting. Touch the pad again to
choose the Low speed setting and a 3rd time
to turn the exhaust ventilation off.
Note: If the temperature gets too hot around the microwave
oven, the fan in the exhaust vent hood will automatically turn
on at the LOW setting to cool the oven. The will
automatically turn off when the internal parts are cool. When
this occurs, the vent cannot be turned off.
Surface Light / On / Off
once for a cooking surface light. Press the
pad again to turn the light off.
MANUAL COOKING
13
Touch the Light/On/Off pad
v
ent fan High/Low/Off pad once for the

Related product manuals