EasyManua.ls Logo

High Tech Pet humane contain HC-8000 User Manual

High Tech Pet humane contain HC-8000
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION, OPERATING
AND TRAINING MANUAL
Please read this entire manual and study all illustrations
before you begin installing your system
HUMANE CONTAIN
Model HC-8000
Super Electronic Dog Fence
Question and Answer IconNeed help?

Do you have a question about the High Tech Pet humane contain HC-8000 and is the answer not in the manual?

High Tech Pet humane contain HC-8000 Specifications

General IconGeneral
BrandHigh Tech Pet
Modelhumane contain HC-8000
CategoryPet Care Product
LanguageEnglish

Summary

Part 1: Introduction

System Components

Lists all items included in the HC-8000 system package.

Key Features

Highlights the main functionalities and technologies of the HC-8000 system.

Part 2: Detailed System Description

TX-1 Base Station Transmitter

Details the base station transmitter, its functions, and status indicators.

RC-8 Ultra-Slim Receiver Collar

Describes the receiver collar, its design, and stimulus delivery.

Installing/Replacing the Battery Pack

Instructions for installing and replacing the battery in the receiver collar.

Boundary Wire

Information about the boundary wire, its specifications, and expansion options.

Part 3: Step-by-Step Installation

Step 1: Plan Your System Layout

Guidance on planning the layout of the boundary wire for optimal system performance.

Step 2: Assemble the Required Tools

Lists the necessary tools for installing the electronic dog fence system.

Step 3: Set Up the Base Station Transmitter

Instructions for mounting and setting up the base station transmitter.

Step 4: Test the Receiver Collar Radio Function

Procedure to test the radio function of the receiver collar.

Step 5: Prepare Twisted Wire Lengths

Steps for preparing twisted wire sections for specific boundary configurations.

Step 6: Layout the Boundary Wire Above Ground

Guidance on running the boundary wire above ground before burying it.

Step 7: Test Your System

Steps to test the entire system's functionality after initial setup.

Step 8: Bury the Boundary Wire

Recommendations and procedures for burying the boundary wire for protection.

Step 9: Place the Boundary Flags

Instructions on placing boundary flags for visual guidance during training.

Step 10: Fit the Receiver Collar to Your Dog

How to properly fit the receiver collar onto the dog for effective stimulus.

Part 4: Training Your Dog

Stage 1 Training

First stage of training focusing on outer boundary edge recognition.

Stage 2 Training

Second stage of training to familiarize the dog with intense stimulus.

Part 5: Important Caution Notices

Dogs are Unpredictable

Discusses individual dog temperaments and aggressive behavior considerations.

Skin Conditions

Explains potential skin issues and recommendations for sensitive dogs.

Neurological Conditions

Advises on checking dogs for health conditions before using the collar.

Part 6: Warranty & Customer Support

Part 7: Troubleshooting Procedures

Test Base Station Transmitter

Troubleshooting procedure to isolate a failed component in the base station transmitter.

Test All Humane Contain Collars

Procedure to test the functionality of the RC-8 receiver collars.

Test the Containment Loop

Steps to test the boundary wire loop and its signal integrity.

Repairing a Broken or Intermittent Containment Loop

Guidance on methods for repairing faulty or intermittent containment loops.

Related product manuals