High Tech Pet Power Pet PX-2 User Manual

INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION
Product Description:
Your new POWER PET Electronic Pet Door is like no
other pet door made. Patented POWER PET
TM
elec-
tronic pet doors are fully automatic, motor driven and
open completely under their own power. Activated by an
ultrasonic pet collar, your new POWER PET door will
keep out stray animals. It is secure against wind, rain,
cold and snow and provides much better insulation than
a conventional ap door. Your new POWER PET door
features an attractive, high-strength door panel that
quickly and quietly powers upward disappearing into the
stylish housing. Your pets are empowered to come and
go as they please while their animal friends are politely
asked to stay out.
POWER PET doors increase home security with a
special automatic, deadbolt locking feature that guards
against would-be intruders. Only the coded signal from
your pet’s collar will open the Power Pet door.
Only Power Pet doors feature an ingenious directional
sensing system that operates a fully automatic, motor
driven panel. The signal emitted from your pet’s collar
tells the Power Pet door how far away your pet is and the direction in which your pet is traveling. This allows the Power
Pet to work like magic, opening only when your pet is on a direct approach, not when it is just wandering by and not when
it is sitting or sleeping next to the door.
Please Read All Instructions Carefully B efore Attempting to
Install or Operate Your Power Pet Door.
TM
Fully Automatic Pet Door
U.S. PATENT # 5,872,516
BATTERY
COMPARTMENT
(BATTERY OPTIONAL)
MOUNTING SCREW
COVERS (8)
DOOR PANEL
Power Input
Jack
Power Input
Jack
CONTROL PANEL
HIGH STRENGTH
ABS COMPOSITE
HOUSING
ULTRASONIC SENSOR

High Tech Pet Power Pet PX-2 Specifications

General

Type	Electronic Pet Door
Power Source	AC Adapter
Material	Plastic
Pet Size	Medium to Large
Features	Motorized, Directional Sensing System
Activation	Ultrasonic Collar
Pet Weight Range	Up to 100 pounds
Locking Mechanism	Automatic
Weather Resistance	Yes
Installation Type	Door or wall mount

Summary

INSTALLATION & OPERATING INSTRUCTIONS

PET COLLAR OPERATED

INSTALLATION

MOUNTING YOUR POWER PET DOOR

Instructions on how to mount the POWER PET door flush to any door or wall, including cutting the hole.

INSTALLATION OVERVIEW

POSITIONING THE OPENING ON DOOR OR WALL:

INSTALLING YOUR POWER PET DOOR

IMPORTANT INSTALLATION NOTES:

Initial Power up

Steps to power up the door using the AC adapter and verify operation.

AC and Battery Operation

Battery Installation

Battery Status Indicators

ADVANCED FEATURES

INTRINSICALLY SAFE OPERATION

Explains the motor and cable drive system and the safety of the closing panel.

AUTO RETRACT FEATURE

Describes the automatic safety feature that retracts the panel if it encounters an obstruction.

AUTO DEAD BOLT LOCKING FEATURE

Explains the spring-loaded locking pin for secure closure against pets and people.

THREE DIFFERENT POWER CHOICES:

DUAL RANGE CONTROLS:

4 WAY ACCESS CONTROL:

AUTOMATIC CLOSE CONTROL:

AUTOMATIC SAFETY RETRACT:

DEFEATING THE AUTOMATIC SAFETY RETRACT:

Instructions on how to disable the auto-retract feature if it causes unnecessary re-opening.

ENABLING AUTOMATIC SAFETY RETRACT:

Instructions on how to re-enable the auto-retract feature.

PET COLLAR OPERATING INSTRUCTIONS

ADJUSTING THE STRAP

REPLACING THE MS-2 or MS-2A BATTERY

TRAINING YOUR PET