30
Debian/Ubuntu Linux Distributions – Installing the Web-based Management Utility
For Debian/Ubuntu Linux distributions, you can use alien to convert the rpm
packages to a .deb package, then use "dpkg -i" command to install each
package. Some script files may be lost during the conversion process from rpm to .deb,
so you may need to make manual corrections. .
The following files will be installed/configured:
/usr/bin/hptsvr - service program
/etc/hptcfg - service config file
/etc/rc.d/init.d/hptdaemon - service control script
/usr/share/hpt/webguiroot - data files
If there is no /etc/hptcfg present, you can add it manually using by using the “echo” command on the
driver file name to /etc/hptcfg.
For example:
# echo hptiop.ko >/etc/hptcfg
Uninstalling the Utility
Open a terminal, and use the following command:
# rpm -e hptsvr-https
Linux Distributions – Command Line Interface (CLI)
Command Line interface versions of the RocketRAID management utilities are available for Linux and
FreeBSD operating systems.
These packages are posted on the HighPoint Technologies, Inc. website, under the BIOS & Driver
downloads page for the RocketRAID 272x (RR2720, 2722) and 2710.
1 - Installing the Web GUI (v1.5) - Windows Operating Systems (2000, XP, 2003,
Vista, 2008, Windows 7)
1) After downloading the Web GUI, double-click the zip file to view the contents. Double-click “Setup”
to start installation. If you are running a 64-bit version of Windows 7, 2008 or Vista, you may need to
right-click the icon, and select “Run as Administrator.”
To Next Page
Loading...
Need help?
General
