HighPoint RR640L - Page 15

Linux Debian on RR640L/620L Installation Guide
6 Appendix A
Support command: help/info/quit/exit/create/delete
 Create Command
Syntax
Create Array Type (RAID0/1/10/5) Member Disk list (1/1, 1/2|*) Capacity
(100|*)
Note:
The RR640L controllers can support RAID0/1/10/5
The 620Lcontrollers can support RAID0/1
Examples
<<< create RAID0
<<< create RAID0 *
<<< create RAID0 * *
Create RAID0 array with all disks and with maximum capacity.
<<< create RAID1 1/1, 1/3 10
Create RAID1 array with disk 1/1 and 1/3 and with 10GB capacity.
<<< create RAID10 *
Create RAID10 array with all disks and with maximum capacity.
<<< create RAID5 *
Create RAID5 array with all disks and with maximum capacity.
 Delete Command
Syntax
delete {array ID}
Examples
<<< delete 1
Delete the first array from Logical device list.
- 11 -