Need help?Do you have a question about the Hiking DDS238-2 and is the answer not in the manual?
General| Model | DDS238-2 |
|---|---|
| Display | LCD |
| Type | Single-phase electronic energy meter |
| Rated Voltage | 220V |
| Accuracy | 1.0 |
| Operating Temperature | -20~+55℃ |
Provides an overview of the energy meter, including a wiring diagram and key technical specifications.
Details the technical parameters of the single-phase energy meter, including standards, voltage, current, and accuracy.
Specifies the operating temperature range for the energy meter, from -25°C to +70°C.
Describes the LED color and behavior for normal operation, flashing proportionally to load.
Details the mounting method using DIN rail 35mm and protection class IP20.
Lists the information displayed on the LCD, including meter number, voltage, current, and energy values.
Mentions the requirement for a 63A type MCB for backup protection.
States the warranty period is 24 months and conditions for voiding it.
Illustrates the connection diagram for RS485 and SO outputs, and power input/output.
Provides the physical dimensions of the energy meter in millimeters.
To Next Page
