Need help?Do you have a question about the Hikmicro B1L and is the answer not in the manual?
General| Protection level | IP54 |
|---|---|
| IP Rating | IP54 |
| Temperature Measurement Range | -20 °C to 550 °C (-4 °F to 1022 °F) |
| Accuracy | ±2°C or ±2% |
| Display | 2.4" LCD |
| Image Modes | White Hot, Black Hot, Rainbow, Ironbow |
| Battery Type | Rechargeable Li-ion |
| Drop Test Height | 2 m (6.56 ft) |
| Sensor Type | Uncooled VOx microbolometer |
| Spectral Range | 8-14μm |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Focus | Fixed |
Defines safety symbols and covers regulations, transportation, power supply, battery, and maintenance guidelines.
Details setting emissivity, distance, measurement range, and units for accurate readings.
Explains how to adjust the temperature section and palette for specific targets.
Covers displaying hotspot, cold spot, center spot, or custom spots on the live view.
Enables color change to red for targets exceeding a set temperature value.
Provides steps to capture thermal images, save, or cancel the snapshot.
Steps to connect the device to a smartphone via Wi-Fi for live viewing and capture.
Instructions for connecting the device to a smartphone using its built-in hotspot.
Guides on updating the device firmware by copying files to the device.
To Next Page