Hikmicro Thunder TH35PC - Buttons; Button Description; Change Battery

2
3. Buttons: To set functions and parameters.
4. Fixing Ring: Holds the clip-on eyepiece in place.
5. Type-C Interface: To connect the device to power supply or transmit data with a type-C cable.
6. Battery Compartment: For holding the battery.
Button Description
Power
Press: Standby mode/wake up device | Hold: Power on/off
* The power indicator stays solid red when the device is on.
Mode
Press: Switch palettes | Hold: Correct non-uniformity of display (FFC)
Capture
Press: Capture snapshots | Hold: Start/stop recording
Menu
Press: Call quick menu | Hold: Enter/exit main menu, and exit quick menu
Image
Press: Clear/display all OSD information on live view interface.
4. Change Battery