Hikmicro Thunder TH35PC - Page 7

5
Remove Adapter
Steps
1. Rotate only the fixing ring counterclockwise, and make sure the device or other parts of the adapter are not
rotated or moved.
2. Plug out and remove the adapter after it is loosen.
Calibrate Image
Steps
1. In main menu, select Image
Calibration in Function Settings, and
press to enter the setting interface.
2. Select , and press to switch calib.
profile.
3. Select , and press to enable
reference line.
4. Select or , and press to
confirm. Press and to set the
coordinates until the window reaches the
target position.
8. More Operations
Scan the QR Code below to obtain the user manual for more operations.