HIKOKI CC 14ST - User Manual

Cut-Off Machine
Profi l kesme
Відрізна машина
Oтрезная машина
CC 14ST
Handling instructions
Kullanım talimatları
lнструкції щодо поводження з пристроєм
Инструкция по эксплуатации
Read through carefully and understand these instructions before use.
Aleti kullanmadan önce bu kılavuzu iyice okuyun ve talimatları anlayın.
Будь ласка, прочитайте інструкції і перевірте себе, чи все зрозуміло, перш ніж користуватися приладом.
Внимательно прочтите данную инструкцию по эксплуатации прежде чем пользоваться инструментом.
000BookCC14STTurUkRu.indb1000BookCC14STTurUkRu.indb1 2019/01/219:54:492019/01/219:54:49

Summary

Cut-Off Machine Overview

Symbols and Safety Warnings

General Warning and Injury Risk

Read warnings to prevent shock/fire/injury. Wear eye protection and use tool responsibly.

EU Environmental Compliance

Proper disposal of electrical tools in EU countries per directives.

Power Tool Safety Guidelines

Electrical Safety

Follow guidelines for plugs, outlets, earthed surfaces, and outdoor use.

Personal Safety

Stay alert, use PPE, ensure footing, avoid distractions, and dress appropriately.

Cut-Off Machine Specific Safety

Operational Safety

Adhere to safety for wheels, guards, workpiece support, and PPE.

Kickback Prevention Strategies

Understand kickback causes and implement precautions like firm grip and correct posture.

Setup, Specifications, and Safety

Additional Safety and Handling

Keep handles dry, ensure workpiece support, and follow safe procedures.

Tool Specifications and Prep

Review specs, power source, switch, and cord setup before operation.

Operation and Maintenance Procedures

Cutting and Wheel Handling

Steps for cutting, operating switch, mounting/dismounting wheels safely.

Workpiece and Adjustment Guidance

Secure workpiece, adjust angles, and set cutting depth for optimal use.

Transport, Maintenance, and Information

Transport and Maintenance

Safely transport unit. Perform regular maintenance like wheel replacement and brush inspection.

Technical and Supply Information

Details on noise, vibration, power supply requirements, and guarantee.

EC Declaration of Conformity

HIKOKI CC 14ST Specifications

General

Power	2200 W
Blade/Wheel Diameter	355 mm
No Load Speed	3800 rpm
Max. Cutting Capacity (Round Pipe)	120 mm
Frequency	50 Hz
Cable Length	2.5 m
Cutting Capacity at 45°	115 mm
Max. Cutting Capacity (Rectangular Pipe)	115 x 130 mm
Voltage	220 V